|
Power
Transformer Site:
Power Transformer Home
Links, Information & Listings for types
of Power Transformers. Access to wholesale pricing!
3 Phase Transformers
Used to set voltages in all 3 phase
applications where a 3 phase power supply exists.
3 Phase Converters
Convert single phase to 3 phase power when 3 phase is most desirable.
Medical Isolation Transformers
Necessary for any hospital and medical
equipment covered by state and federal safety and performance regulations.
Isolation Transformers
Separates the incoming power from that
which finally runs the equipment. Protects against unwanted characteristics
generated in the use of power within an area.
Buck Boost Transformers
Often used for low voltage applications
and raising voltage for 230V motors or 120V lighting systems;
designed to reduce (buck) or
raise (boost) line voltage from 5% to 20%.
Custom Transformers
Specific needs can be filled by custom
building a transformer to the requirements of the customer.
Step Down Transformers
Adjust voltage from high voltage
transmission lines or to correct local lines for chronically high voltage
conditions.
Step Up Transformers
Adjust voltage for transmission at higher
voltages or to correct local lines for chronically low voltages.
AC Line Reactors
Adjust, block or otherwise handle
unwanted power characteristics often generated during normal use of power in
an area.
Acme Transformers
A reliable leading American transformer
distributing company.
Hammond Transformers
Originated as a family -owned and run
company and is now a nation-wide distributor!
Jefferson Transformers
In business over 93 years; supplying a
diverse selection of products to an equally diverse clientele. |
PURPOSE AND APPLICATIONS
OF BUCK BOOST TRANSFORMERS
Buck Boost Transformers
are small single-phase transformers commonly used
when voltages are consistently too high or too low to efficiently run
equipment like motors and electronics when these applications best run at
their rated power demand. These are a very economical way to achieve optimum
electrical service. Adjusting 208V conditions to 230V for motors and going
from 110V to 120V for lighting are two common examples.
Buck Boost transformers are not intended to
correct variable voltage conditions.
 Buck
Boost Transformers are built to reduce (buck) or raise (boost) line
voltage from 5% to 20%. They specifically address chronically off-standard
local voltage conditions and adjust to optimum for the equipment to be used.
Adjusting local voltages for
industrial and commercial heating and air conditioning systems and boosting
240V to 277V for lighting systems are also very common uses.
Buck Boost Transformers
are additionally employed in lower voltage applications. Landscape lighting
and low voltage lighting are examples of this type of usage. It is common to see
Buck Boost transformers with primary voltages running at 120V, 240V, or
440V with secondary circuits usually running at 12, 16, 24, 32 or 48 volts,
though other voltages can be custom-ordered. Sizes are often usually
available in 50 VA through 10KVA.
Warning!
Equipment failure can result from incorrect voltage. It can be
critical to have a Buck Boost Transformer properly installed under
chronically high or low voltage conditions!
Contact
TEMCo for your
Buck Boost Transformer
needs. TEMCo carries most major brands and offers competitive pricing with
quick delivery. Custom-designed Buck Boost Transformers can be ordered to
fit your exact specifications.
Call (510)
490-2187
(US & International)
or 1-800-613-2290 (US only)
for prices and information.
Wholesale Pricing Available!
Bookmark this site:
|
Transformer
Resources:
Isolation Transformers
Isolation transformers of all types,
including custom order equipment built to your specifications!.
Medical Isolation Transformers
A source for a broad selection of medical grade
isolation transformers, including custom order equipment built to
your specifications!.
Buck Boost Transformers
A wide range of Buck Boost Transformers
and brands to select from.
Custom Transformers
Your specific needs can be supplied here with
limited
delay and great pricing on custom designed equipment.
Step Down Transformers
Power Transformers designed to reduce
voltage to an optimum range. Descriptive data included.
Step Up Transformers
Power Transformers designed to
increase voltage to an optimum range. Descriptive data included.
AC Line Reactors
Listings of 3 phase devices used as
filters rather than for changing voltage.
Acme Transformers
An expansive selection of Power Transformers
for all applications.
Hammond Transformers
Primarily dealing in copper-wound
transformers.
Jefferson Transformers
All American-made products. Located in
Brownsville, Texas.
Diesel Generators
Access information and pricing on a variety
of brands and types of diesel generators designed to fit every need!
Custom-built generators can also be ordered.
Static Phase Converters
Critical information regarding the difference
between static phase and rotary phase converters. A must for anyone considering
these alternatives!
Phase Converter
Read about the
technology differences between the types of phase converters available from this
top phase converter manufacturer.
|
